If you have A Right Hand Drive Z32, Chances are the Drivers Side Window Regulator is worn out from use.
The Non Replaceable Rollers/Guides Wear, all of the Pivot Points become Worn & Flogged Out & like the Glass Rollers, they contribute significantly to the Smooth Operation of the Window.
The Combination Of Worn Window Rollers, Dirty Tracks & a Worn Regulator are the Main Causes of Window Operation Issues, eventually leading to Premature Lift Motor Failure.
With the Ridiculously High cost of Genuine Lift Motors & no aftermarket replacements available, Replacing a Worn Window Regulator should be considered Mandatory.
Additionally, I am also offering a Window Lift Motor Check Over & Refresh Service for those who purchase a Regulator.
To purchase this Service use the Option Tab on the Regulator Price.
Send in your Working Lift Motor & The Bolts that attach it to the Regulator.
I will Tear it down & Test/Check all of the Serviceable components.
If it appears okay, I will,
- Fully Break Down the Motor
- Clean out all of the Internals,
- Either Machine or Abrade the Commutator, (condition dependant)
- Check the Condition of the Carbon Brushes
- Re Grease the Worm Drive Shaft & Main Gear
- Check the Winding for Continuity Issues
- Re-assemble & Test
- Fit onto the New Regulator
- Test again
This will dramatically increase the Remaining Service Life & Performance of your Lift Motor.
Note: I only keep One Regulator in Stock. When it sells, it takes 5 weeks to restock another from Nissan Japan.